Skip to main content
Engineering LibreTexts

3: Ideal Diode Equation

  • Page ID
    5924
  • \( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \) \( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)\(\newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\) \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\) \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\) \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\) \( \newcommand{\Span}{\mathrm{span}}\) \(\newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\) \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\) \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\) \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\) \( \newcommand{\Span}{\mathrm{span}}\)\(\newcommand{\AA}{\unicode[.8,0]{x212B}}\)

    As seen in the previous sections, a p-n junction diode creates the following current: under reverse bias, there is a small, constant reverse current, and under forward bias, there is a forward current that increases with voltage. The current-voltage function (also called the "i-v characteristic") for an ideal diode is

    \[i(v) = I_S \left[\exp \left(\dfrac{v}{ηV_T}\right) - 1\right], \quad v > V_Z \label{eq1}\]

    • where \(I_S\) is the reverse saturation current,
    • \(v\) is the applied voltage (reverse bias is negative),
    • \(V_T = T / 11,586\) is the volt equivalent of temperature, and
    • \(η\) is the emission coefficient, which is 1 for germanium devices and 2 for silicon devices.

    Note that \(i\) is defined as positive when flowing from p to n. Equation \ref{eq1} is also called the Shockley ideal diode equation or the diode law. Note also that for \(v ≤ V_Z\), the diode is in breakdown and the ideal diode equation no longer applies; for \(v ≤ V_Z, \quad i = -∞\). The ideal diode i-v characteristic curve is shown below:

    Picture 77.png
    Figure \(\PageIndex{1}\): Ideal diode equation

    The ideal diode equation is very useful as a formula for current as a function of voltage. However, at times the inverse relation may be more useful; if the ideal diode equation is inverted and solved for voltage as a function of current, we find:

    \[v(i) = ηV_T \ln \left[\left(\dfrac{i}{I_S}\right) + 1\right].\]

    Approximations

    Infinite step function

    A number of approximations of diode behavior can be made from the ideal diode equation. The simplest approximation to make is to represent the diode as a device that allows no current through -- that is, it acts as an open circuit -- under reverse bias, and allows an unlimited amount of current through -- a closed circuit -- under forward bias. In this simplified model, the current-voltage relation (also called the "i-v characterstic") is an infinite step function:

    \[i=\left\{\begin{array}{l}
    0, v \leq 0 \\
    \infty, v>0
    \end{array}\right.\]

    This characteristic is depicted below:

    Picture 73.png

    This approximation is used in circuit analysis, as we will see in the next section.

    Forward current approximation

    In the case of large forward bias, a good approximation of the ideal diode equation is to simply set the second term of Equation \ref{eq1} to zero. This approximation is valid because the ideal diode i-v curve increases very quickly, and because reverse saturation current IS is typically very small. This approximation is acceptable for v > 0.2 V. The forward current approximation, as we will call it, results in the following formula:

    \[i(v) ≈ I_S \exp \left(\dfrac{v}{ηV_T}\right) \quad v > 0.2 \,V.\]

    Reverse current approximation

    Under reverse bias, the resulting current can be treated as simply the reverse saturation current, \(I_S\). In reality, the current under reverse bias will asymptotically approach \(I_S\), but the small magnitude of the reverse saturation current makes this discrepancy negligible. The reverse current approximation is valid over the range \(V_Z < v < 0\) (the diode enters breakdown for \(v ≤ V_Z\)):

    \[i(v) ≈ I_S, \quad V_Z < v < 0.\]

    References

    1. "Chapter 6: Diodes." Fundamentals of Electrical Engineering. 2nd ed. New York, New York: Oxford UP, 1996. 363-64. Print.

    3: Ideal Diode Equation is shared under a not declared license and was authored, remixed, and/or curated by LibreTexts.

    • Was this article helpful?