Skip to main content
Engineering LibreTexts

9.2: Practice 8 Standard Libraries

  • Page ID
    10290
  • Learning Objectives

    With 100% accuracy during a: memory building activity, exercises, lab assignment, problems, or timed quiz/exam; the student is expected to:

    Define the terms on the definitions as listed in the modules associated with this chapter.

    Given a testing shell program already coded and tested, add another specific task function, and test it, then create a user defined specific task header file, a user defined specific task prototypes document and a source code program to verify that the header file works properly.

    Memory Building Activities

    Link to: MBA 08

    Exercises

    Questions
        1. The standard library is a set of specific task functions that have been added to the programming language for universal use.
        2. Programmers should not have confidence that standard library functions work properly.
        3. It would be easier to write programs without using specific task functions.
    Answers
        1. True
        2. False
        3. False
    

    Lab Assignment

    Creating a Folder or Sub-Folder for Chapter 08 Files

    Depending on your compiler/IDE, you should decide where to download and store source code files for processing. Prudence dictates that you create these folders as needed prior to downloading source code files. A suggested sub-folder for the Bloodshed Dev-C++ 5 compiler/IDE might be named:

    • Chapter_08 within the folder named: Cpp_Source_Code_Files

    If you have not done so, please create the folder(s) and/or sub-folder(s) as appropriate.

    Download the Lab File(s)

    Download and store the following file(s) to your storage device in the appropriate folder(s). You may need to right click on the link and select "Save Target As" in order to download the file.

    Download from Connexions: Lab_08_Testing_Shell.cpp

    Detailed Lab Instructions

    Read and follow the directions below carefully, and perform the steps in the order listed.

    • Navigate to your sub-folder: Chapter_08. Compile and run the Lab 08 Testing Shell source code. Note: This program uses an include file that points to the "udst_monitor.h" file as explained in Connexions Chapter 7 materials.
    • You need to add another function to this testing shell titled: area_triangle that is to calculate the area of a triangle. Define the function, prototype it, and within the function main add an area for calling the function (similar to the existing functions with test data). Be confident that it is working properly.
    • Following same process as shown in the Connexions module "Using a Header File for User Defined Specific Task Functions" that is within the Chapter 7 materials; make the following files: udst_geo_area.h and udst_geo_area_prototypes.txt and Lab_08_Verify_Header.cpp
    • Copy the header file to your user library, then build (compile and run) your verify header program.
    • After you have successfully written this program, if you are taking this course for college credit, follow the instructions from your professor/instructor for submitting it for grading.

    Problems

    Problems 08a - Instructions

    Write the C++ code to do the following specific task function.

    Pseudocode
    Function area_regular_hexagon
      Pass In: side
      Calculate: side times side times 3 times the square root of 0.75
      Pass Out: the calculation
    Endfunction