Skip to main content
Engineering LibreTexts

4.8: A development plan

  • Page ID
    41396
  • A development plan is a process for writing programs. The process we used in this case study is “encapsulation and generalization”. The steps of this process are:

    1. Start by writing a small program with no function definitions.
    2. Once you get the program working, identify a coherent piece of it, encapsulate the piece in a function and give it a name.
    3. Generalize the function by adding appropriate parameters.
    4. Repeat steps 1–3 until you have a set of working functions. Copy and paste working code to avoid retyping (and re-debugging).
    5. Look for opportunities to improve the program by refactoring. For example, if you have similar code in several places, consider factoring it into an appropriately general function.

    This process has some drawbacks—we will see alternatives later—but it can be useful if you don’t know ahead of time how to divide the program into functions. This approach lets you design as you go along.

    • Was this article helpful?