Skip to main content
Engineering LibreTexts

4.3: Surface Impedance

  • Page ID
    19566
  • \( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \) \( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)\(\newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\) \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\) \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\) \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\) \( \newcommand{\Span}{\mathrm{span}}\) \(\newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\) \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\) \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\) \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\) \( \newcommand{\Span}{\mathrm{span}}\)\(\newcommand{\AA}{\unicode[.8,0]{x212B}}\)

    In Section 4.2, we derived the following expression for the impedance \(Z\) of a good conductor having width \(W\), length \(l\), and which is infinitely deep:

    \[Z \approx \frac{1+j}{\sigma\delta_s} \cdot \frac{l}{W} ~~~\mbox{(AC case)} \label{m0160_eZ} \]

    where \(\sigma\) is conductivity (SI base units of S/m) and \(\delta_s\) is skin depth. Note that \(\delta_s\) and \(\sigma\) are constitutive parameters of material, and do not depend on geometry; whereas \(l\) and \(W\) describe geometry. With this in mind, we define the surface impedance \(Z_S\) as follows:

    \[\boxed{ Z_S \triangleq \frac{1+j}{\sigma\delta_s} } \label{m0160_eCFGC-Z} \]

    so that

    \[Z \approx Z_S \frac{l}{W} \nonumber \]

    Unlike the terminal impedance \(Z\), \(Z_S\) is strictly a materials property. In this way, it is like the intrinsic or “wave” impedance \(\eta\), which is also a materials property. Although the units of \(Z_S\) are those of impedance (i.e., ohms), surface impedance is usually indicated as having units of “\(\Omega/\square\)” (“ohms per square”) to prevent confusion with the terminal impedance. Summarizing:

    Surface impedance \(Z_S\) (Equation \ref{m0160_eCFGC-Z}) is a materials property having units of \(\Omega/\square\), and which characterizes the AC impedance of a material independently of the length and width of the material.

    Surface impedance is often used to specify sheet materials used in the manufacture of electronic and semiconductor devices, where the real part of the surface impedance is more commonly known as the surface resistance or sheet resistance.


    This page titled 4.3: Surface Impedance is shared under a CC BY-SA 4.0 license and was authored, remixed, and/or curated by Steven W. Ellingson (Virginia Tech Libraries' Open Education Initiative) via source content that was edited to the style and standards of the LibreTexts platform; a detailed edit history is available upon request.