Skip to main content
Engineering LibreTexts

2.6: Questions

  • Page ID
    26120
  • 1. If the LDR and resistor positions had been swapped, how would the values of Table 2.5.2 change?

    2. Would the voltages measured in Table 2.5.2 change appreciably if R had been 1 k\(\Omega\) instead of 10 k\(\Omega\)?

    3. If the positions of the thermistor and resistor in Figure 2.3.2 had been swapped, how would the Table 2.5.5 values change?

    4. If 20 volt power sources had been used, how would the values of Tables 2.5.2 and 2.5.5 change, if at all?

    • Was this article helpful?