# Snell's Law

[ "article:topic" ]

Snell's Law, also known as the Law of Refraction, is an equation that relates the angle of the incident light and the angle of the transmitted light at the interface of two different mediums. Snell's Law can be applied to all materials, in all phases of matter. Most people are familiar with Snell's Law because of the apparent shortening of their legs that is observed when  standing in water. Another commonly recognized example of refraction in a material is diamonds. The many facets of the cut diamond combined with a high index of refraction give diamonds the brilliance that they are known for.  Snell's Law is especially important for optical devices, such as fiber optics. Snell's Law states that the ratio of the sine of the angles of incidence and transmission is equal to the ratio of the refractive index of the materials at the interface.

### Speed of Light and Index of Refraction

Refraction occurs because the speed of the light changes when it passes into a new medium. The speed of light in a medium is given by the following equation:

$c=nv$

where n is the refractive index of the material and c is the speed of light in a vacuum. The refractive index can also be determined from the permittivity and permeability of the material. Therefore it is possible to know the optical properties of the material from the electrical properties of the material. Using these properties, the index of refraction is given by the following equation:

$n=\dfrac{c}{v}=\sqrt{\dfrac{\varepsilon \mu }{\varepsilon_{0} \mu_{0}}}=\sqrt{\varepsilon_{r} \mu_{r}}$

where εr and μr are the permativity and permeability of the material respectively. Table 1 lists the index of refraction for some common materials.

 Vacuum 1 Air 1.00029 Water 1.333 Ice 1.309 Plexiglass 1.49 Soda-Lime Glass 1.46 Diamond 2.42

### Snell's Law

Snell's law relates the sines of the angles of incidence and transmission to the index of refraction for each material:

$\dfrac{\sin \theta_{1}}{\sin \theta_{2}}=\dfrac{n_{2}}{n_{1}}$

It should be noted that the angles are measured from the normal line at the interface (Figure 1).

Figure 1: Refraction at the interface between two materials (taken with permission from Wikipedia)

Additionally, because the index of refraction is related to the speed of light in the material, the following equation is also true:

$\dfrac{\sin \theta_{1}}{sin \theta_{2}}=\dfrac{v_{1}}{v_{2}}$

As light crosses the boundary between two different materials, the light will be refracted either at a greater angle or a smaller angle depending on the relative refractive indecies of each material. If the index of refraction for the second material is greater than the first material, then the light will be refracted to a smaller angle.

### Theory: Light as a Wave

Snell's Law arises from the wave nature of light. Light can be described in one of several ways: a ray, a particle (photon), and as a wave. The interaction of light with a material can be best described for light when light is thought of as a wave.

The key to understanding the behavior of light at an interface is that Energy must be conserved: the energy of light going in the first material must be the same as the energy of the light in the second material. The energy of light can be described in the following way:

$E=hf=\dfrac{hv}{\lambda}$

where f is the frequency of the wave, v is the speed of the wave, h is Plank's constant, and c is the speed of light in a vacuum.

Because energy must be conserved at the boundary, the frequency of the light must remain the same for all materials. This is because the number of waves arriving at the interface per unit time must be the same as the number of waves leaving the interface per unit time; the boundary interface cannot create or destroy waves. This concept is shown in  Figure 2.

Figure 2: The number of wavefronts arriving at the interface must be the same at the number leaving the interface.
(taken with permission from Wikipedia)

However, the speed that a wave propagates at is dependent on the medium the light is traveling in. This velocity change is due to the interaction between light and the resonance of the electrons in the material which are either tightly or loosely held to the nuclei in the material. It is this change in velocity that causes the refraction of light in a new medium. The velocity of light in a medium is given by the following equation: $v=\dfrac{1}{\sqrt{\varepsilon \mu }}$where ε is the the permativity and μ is the permeability of the particular material.

### Critical Angle and Total Internal Reflection

An important extension of Snell's law is the concept of Total Internal Reflection and the critical angle. For any combination of mediums, there is an angle for which the refracted light will be perpendicular to the normal (Figure 3). The critical angle is given by the equation:

$\theta_{c}=\sin^{-1} \left [ \dfrac{n_{1}}{n_{2}} \right ]$

Figure 3: Refraction, Critical Angle, and Total Internal Reflection at an interface (taken with permission from Wikipedia)

If the incident angle is greater than the critical angle, the light will be completely reflected back into the original medium. This is shown in the last image of Figure 3. Total Internal Reflection can also occur if there is a significant difference in the refractive index between the two materials. It is this type of total internal reflection that gives rise to fiber optics.

### Applications and Importance

A very important application of Snell's Law is Fiber Optics. Fiber Optics are used for many applications, from telecommunications to data transmission in high speed servers. Because the fibers are not laid out in straight lines, the light must be guided down the length of the fiber. This is achieved with one of three types of fiber: step-index fiber, graded-index fiber (multimode), or single-mode fiber. These fiber types are shown in Figure 4.

 Figure 4: Schematics and comparison of Fiber Optic Cable types.  (taken with permission from Wikipedia)

In step-index fibers, there is a very large decrease in the index of refraction at the interface between the glass fiber and its cladding. This causes the light to move in a zigzag pattern down the length of the fiber, and because of this there is a considerable distortion in the light pulse. It is because of this distortion that step-index fibers are only used for applications that have shorter fiber lengths.

For graded-mode fibers, the index of refraction of the core decreases mas the radius of the fiber gets larger. This is achieved by introducing  additives to the fiber glass, such as B2O3 and GeO2. By having the index of refraction change gradually, the light is gradually bent back towards the center of the fiber. Therefore, the distortion of the light is much smaller than it is for the step-index fiber. This means that a longer fiber can be used if the fiber has graded-index core. Graded-index core fibers are generally used for data transfer, such as in local area networks.

The final type of fiber is the single-mode fiber. Single-mode fibers are generally used for long distance  networks where there is very little need for a curve in the fiber. In single-mode fibers, the light travels straight down the axis of the fiber and does not experience refraction. This is shown in Figure 4.

### Questions

1. Calculation of Transmittance Angle
Using values given in Table 1, calculate the angle of transmittance if the incident angle of the light is 26o. The light is moving from air into glass.
2. Is Snell's Law only for solid materials?
3. Which direction will light bend (towards or away from the normal) if the index of refraction for the second material in the interface is higher than the first? Why?

1. θ=17.5

2. No

3. The transmitted angle will be smaller than the incident angle. So the light will bend towards the normal. This is because the a higher index of refraction in the second material causes a decrease in the speed of the light in the second material.

### References

1. Flens, Frank. Director of Engineering, Finisar. Personal interview.
2. Hummel, Rolf E. Electronic Properties of Materials. New York: Springer, 2011. Print.
3. Young, Hugh D. , Roger A. Freedman. Sears and Zemansky's University Physics: with Modern Physics. San Fransisco: Pearson Addison Wesley, 2008. Print.
4. Hecht, E., and A. Zajac. Optics. 1979. Print.
5. Shackelford, James F. Introduction to Materials Science for Engineers. Upper Saddle River, NJ: Pearson/Prentice Hall, 2005. Print.
6. Hecht, Eugene. Optics. Reading, MA: Addison-Weley, 2002. Print.
7. Callister, William D., David G. Rethwisch. Materials Science and Engineering: An Introduction. December 2009. Print.

### ​Contributors

• Hannah Flens (UC  Davis, Material Science and Engineering)