11.4.2: Isentropic Convergingâ€“Diverging Flow in Cross Section
 Last updated


Save as PDF
Fig. 11.7 Control volume inside a convergingdiverging nozzle.
The important sub case in this chapter is the flow in a converging–diverging nozzle. The control volume is shown in Figure 11.7. There are two models that assume variable area flow: First is isentropic and adiabatic model. Second is isentropic and isothermal model. Here only the first model will be described. Clearly, the stagnation temperature, \(T_0\), is constant through the adiabatic flow because there isn't heat transfer. Therefore, the stagnation pressure is also constant through the flow because the flow isentropic. Conversely, in mathematical terms, equation (27) and equation (29) are the same. If the right hand side is constant for one variable, it is constant for the other. In the same vein, the stagnation density is constant through the flow. Thus, knowing the Mach number or the temperature will provide all that is needed to find the other properties. The only properties that need to be connected are the cross section area and the Mach number. Examination of the relation between properties can then be carried out.