Skip to main content
Engineering LibreTexts Close and Far Views of the Oblique Shock

  • Page ID
  • Fig. 12.10 A local and a far view of the oblique shock.

    In many cases, the close proximity view provides a continuous turning of the deflection angle, \(\delta\). Yet, the far view shows a sharp transition. The traditional approach to reconcile these two views is by suggesting that the far view shock is a collection of many small weak shocks (see Figure 12.10). At the local view close to the wall, the oblique shock is a weak "weak oblique'' shock. From the far view, the oblique shock is an accumulation of many small (or again weak) "weak shocks.'' However, these small "shocks'' are built or accumulate into a large and abrupt change (shock). In this theory, the boundary layer (B.L.) does not enter into the calculation. In reality, the boundary layer increases the zone where a continuous flow exists. The boundary layer reduces the upstream flow velocity and therefore the shock does not exist at close proximity to the wall. In larger distance from the wall, the shock becomes possible.


    • Dr. Genick Bar-Meir. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or later or Potto license.