Skip to main content
Engineering LibreTexts

24.6: Questions

  • Page ID
    37319
  • 1. Would the results of this exercise have been considerably different if the load had been ten times larger? What does that say about the performance of the circuit?

    2. If the 22 k source had been directly connected to the 220 load without the follower in between, what would be the load voltage?

    3. How do the THD levels of the follower compare to those of the swamped common emitter amplifier?

    4. How would the circuit parameters change if a Darlington pair had not been used?

    • Was this article helpful?