Skip to main content
Engineering LibreTexts

5.7: Case Study- Gold- Worth its Weight?

  • Page ID
    12044
  • Gold is a symbol of wealth, prestige, and royalty that has attracted and fascinated people for many thousands of years (see Figure \(\PageIndex{1}\)). Gold is considered by many to be the most desirable precious metal because it has been sought after for coins, jewelry, and other arts since long before the beginning of recorded history. Historically its value was used as a currency standard (the gold standard) although not anymore. Gold is very dense but also very malleable; a gram of gold can be hammered into a 1 m2 sheet of gold leaf. Gold is extremely resistant to corrosion and chemical attack, making it almost indestructible. It is also very rare and costly to produce. Today the primary uses of gold are jewelry and the arts, electronics, and dentistry. The major use in electronics is gold plating of electrical contacts to provide a corrosion-resistant conductive layer on copper. Most gold is easily recycled except for gold plating due to combinations with other compounds such as cyanide. About half of the world’s gold ever produced has been produced since 1965 (see Figure \(\PageIndex{2}\)). At the current consumption rate today’s gold reserves are expected to last only 20 more years.

    photograph of native gold
    Figure \(\PageIndex{1}\) Native Gold A collage of 2 photos, showing 3 pieces of native gold. The top piece is from the Washington mining district, California, and the bottom two are from Victoria, Australia. Source: Aram Dulyan via Wikimedia Commons
    chart showing world gold production
    Figure \(\PageIndex{2}\) World Gold Production World gold production from 1900 to 2009 including annual (blue line) and cumulative data (gray line) Source: Realterm via Wikimedia Commons

    There are two types of gold ore deposits: (1) hydrothermal, where magma-heated groundwater dissolves gold from a large volume of rock and deposits it in rock fractures and (2) placer, where rivers erode a gold ore deposit of hydrothermal origin and deposit the heavy gold grains at the bottom of river channels. Although gold’s resistance to chemical attack makes it extremely durable and reusable, that same property also makes gold difficult to extract from rock. As a result, some gold mining methods can have an enormous environmental impact. The first discovered gold ore was from placer deposits, which are relatively simple to mine. The method of extracting gold in a placer deposit involves density settling of gold grains in moving water, similar to how placer deposits form. Specific variations of placer mining include hushing (developed by the ancient Romans where a torrent of water is sent through a landscape via an aqueduct), sluice box (where running water passes through a wooden box with riffles on the bottom), panning (a hand-held conical metal pan where water swirls around) and hydraulic (where high pressure hoses cut into natural landscapes, see Figure \(\PageIndex{3}\). Figure \(\PageIndex{3}\), developed during the California Gold Rush in the middle 1800s, can destroy natural settings, accelerate soil erosion, and create sediment-rich rivers that later flood due to sediment infilling the channel. The largest gold ore body ever discovered is an ancient, lithified (i.e., hardened) placer deposit. Nearly half of the world’s gold ever mined has come from South Africa’s Witwatersrand deposits, which also have the world’s deepest underground mine at about 4,000 m. To increase the efficiency of gold panning, liquid mercury is added to gold pans because mercury can form an alloy with gold in a method called mercury amalgamation. The mercury-gold amalgam is then collected and heated to vaporize the mercury and concentrate the gold. Although mercury amalgamation is no longer used commercially, it is still used by amateur gold panners. Unfortunately, considerable mercury has been released to the environment with this method, which is problematic because mercury bioaccumulates and it is easily converted to methylmercury, which is highly toxic.

    photograph of gold hydraulic mining
    Figure \(\PageIndex{3}\) Gold hydraulic mining in New Zealand, 1880s Source: James Ring via Wikimedia Commons

    Today most gold mining is done by a method called heap leaching, where cyanide-rich water percolates through finely ground gold ore and dissolves the gold over a period of months; eventually the water is collected and treated to remove the gold. This process revolutionized gold mining because it allowed economic recovery of gold from very low-grade ore (down to 1 ppm) and even from gold ore tailings that previously were considered waste. On the other hand, heap leaching is controversial because of the toxic nature of cyanide. The world’s largest cyanide spill to date occurred at Baia Mare in northern Romania (see Figure \(\PageIndex{4}\)).  In January 2000 after a period of heavy rain and snowmelt, a dam surrounding a gold tailings pond collapsed and sent into the drainage basin of the Danube River 100,000 m3 (100 million liters) of water with 500 - 1,000 ppm cyanide, killing more than a thousand metric tons of fish (see Figure \(\PageIndex{4}\)). Considering the large environmental impact of gold mining, this may take some of the glitter from gold.

    map of Baia Mare
    Figure \(\PageIndex{4}\) Baia Mare Map of Tisza River drainage basin with pollution hot spots including Baia Mare, Romania, which is the location of a cyanide spill disaster in 2000 Source: United Nations Environment Program - GRID-Arendal
    photograph of dead fish on the shores of Baia Mare
    Figure \(\PageIndex{5}\) Baia Mare Cyanide Spill Dead fish from cyanide spill disaster Baia Mare, Romania, the location of a in 2000 Source: Toxipedia

    Glossary

    Heap leaching

    Method of gold mining where cyanide-rich water percolates through finely ground gold ore and dissolves the gold over a period of months; eventually the water is collected and treated to remove the gold.

    Hushing

    Method of placer mining developed by the ancient Romans where a torrent of water is sent through a landscape via an aqueduct.

    Hydraulic mining

    Method of placer mining where high pressure hoses cut into natural landscapes.

    Mercury amalgamation

    Method of gold panning where liquid mercury is added to gold pans because mercury can form an alloy with gold.

    Panning

    Method of placer mining where water in a hand-held conical metal pan swirls around.

    Sluice box

    Method of placer mining where running water passes through a wooden box with riffles on the bottom.