Skip to main content
Engineering LibreTexts

17.14: Appendix N- The Snow Plough Effect

  • Page ID
    35444
  • Screen Shot 2020-09-01 at 3.53.44 PM.pngScreen Shot 2020-09-01 at 3.54.42 PM.pngScreen Shot 2020-09-01 at 3.55.33 PM.png
    Figure N-1: Blade angle 30 degrees – Deviation angle 00 degrees
    Screen Shot 2020-09-01 at 3.57.49 PM.pngScreen Shot 2020-09-01 at 3.58.59 PM.pngScreen Shot 2020-09-01 at 3.59.46 PM.png
    Figure N-2: Blade angle 30 degrees – Deviation angle 15 degrees

    The 105 μm sand properties from Appendix L were used.

    Screen Shot 2020-09-01 at 4.01.07 PM.pngScreen Shot 2020-09-01 at 4.02.22 PM.pngScreen Shot 2020-09-01 at 4.03.28 PM.png
    Figure N-3: Blade angle 30 degrees – Deviation angle 30 degrees
    Screen Shot 2020-09-01 at 4.05.05 PM.pngScreen Shot 2020-09-01 at 4.06.07 PM.pngScreen Shot 2020-09-01 at 4.07.09 PM.png
    Figure N-4: Blade angle 45 degrees – Deviation angle 00 degrees
    Screen Shot 2020-09-01 at 4.09.10 PM.pngScreen Shot 2020-09-01 at 4.10.14 PM.pngScreen Shot 2020-09-01 at 4.11.05 PM.png
    Figure N-5: Blade angle 45 degrees – Deviation angle 15 degrees
    Screen Shot 2020-09-01 at 4.13.20 PM.pngScreen Shot 2020-09-01 at 4.14.18 PM.pngScreen Shot 2020-09-01 at 4.15.17 PM.png
    Figure N-6: Blade angle 45 degrees – Deviation angle 30 degrees
    Screen Shot 2020-09-01 at 4.17.21 PM.pngScreen Shot 2020-09-01 at 4.18.02 PM.pngScreen Shot 2020-09-01 at 4.18.49 PM.png
    Figure N-7: Blade angle 45 degrees – Deviation angle 45 degrees
    Screen Shot 2020-09-01 at 4.19.54 PM.pngScreen Shot 2020-09-01 at 4.37.15 PM.pngScreen Shot 2020-09-01 at 4.37.52 PM.png
    Figure N-8: Blade angle 60 degrees – Deviation angle 00 degrees
    Screen Shot 2020-09-01 at 4.40.07 PM.pngScreen Shot 2020-09-01 at 4.40.56 PM.pngScreen Shot 2020-09-01 at 4.43.59 PM.png
    Figure N-9: Blade angle 60 degrees – Deviation angle 15 degrees
    Screen Shot 2020-09-01 at 4.52.56 PM.pngScreen Shot 2020-09-01 at 4.55.28 PM.pngScreen Shot 2020-09-01 at 4.56.22 PM.png
    Figure N-10: Blade angle 60 degrees – Deviation angle 30 degrees
    Screen Shot 2020-09-01 at 5.00.24 PM.pngScreen Shot 2020-09-01 at 5.01.03 PM.pngScreen Shot 2020-09-01 at 5.02.31 PM.png
    Figure N-11: Blade angle 60 degrees – Deviation angle 45 degrees

     

    • Was this article helpful?