Skip to main content
Engineering LibreTexts

3.4: Simples Transient Responses of First Order Systems, First Order Time Constants and Settling Times

  • Page ID
    7638
  • \( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)

    \( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)

    \( \newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\)

    ( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\)

    \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\)

    \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\)

    \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\)

    \( \newcommand{\Span}{\mathrm{span}}\)

    \( \newcommand{\id}{\mathrm{id}}\)

    \( \newcommand{\Span}{\mathrm{span}}\)

    \( \newcommand{\kernel}{\mathrm{null}\,}\)

    \( \newcommand{\range}{\mathrm{range}\,}\)

    \( \newcommand{\RealPart}{\mathrm{Re}}\)

    \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\)

    \( \newcommand{\Argument}{\mathrm{Arg}}\)

    \( \newcommand{\norm}[1]{\| #1 \|}\)

    \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\)

    \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\AA}{\unicode[.8,0]{x212B}}\)

    \( \newcommand{\vectorA}[1]{\vec{#1}}      % arrow\)

    \( \newcommand{\vectorAt}[1]{\vec{\text{#1}}}      % arrow\)

    \( \newcommand{\vectorB}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)

    \( \newcommand{\vectorC}[1]{\textbf{#1}} \)

    \( \newcommand{\vectorD}[1]{\overrightarrow{#1}} \)

    \( \newcommand{\vectorDt}[1]{\overrightarrow{\text{#1}}} \)

    \( \newcommand{\vectE}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash{\mathbf {#1}}}} \)

    \( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \)

    \( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)

    \(\newcommand{\avec}{\mathbf a}\) \(\newcommand{\bvec}{\mathbf b}\) \(\newcommand{\cvec}{\mathbf c}\) \(\newcommand{\dvec}{\mathbf d}\) \(\newcommand{\dtil}{\widetilde{\mathbf d}}\) \(\newcommand{\evec}{\mathbf e}\) \(\newcommand{\fvec}{\mathbf f}\) \(\newcommand{\nvec}{\mathbf n}\) \(\newcommand{\pvec}{\mathbf p}\) \(\newcommand{\qvec}{\mathbf q}\) \(\newcommand{\svec}{\mathbf s}\) \(\newcommand{\tvec}{\mathbf t}\) \(\newcommand{\uvec}{\mathbf u}\) \(\newcommand{\vvec}{\mathbf v}\) \(\newcommand{\wvec}{\mathbf w}\) \(\newcommand{\xvec}{\mathbf x}\) \(\newcommand{\yvec}{\mathbf y}\) \(\newcommand{\zvec}{\mathbf z}\) \(\newcommand{\rvec}{\mathbf r}\) \(\newcommand{\mvec}{\mathbf m}\) \(\newcommand{\zerovec}{\mathbf 0}\) \(\newcommand{\onevec}{\mathbf 1}\) \(\newcommand{\real}{\mathbb R}\) \(\newcommand{\twovec}[2]{\left[\begin{array}{r}#1 \\ #2 \end{array}\right]}\) \(\newcommand{\ctwovec}[2]{\left[\begin{array}{c}#1 \\ #2 \end{array}\right]}\) \(\newcommand{\threevec}[3]{\left[\begin{array}{r}#1 \\ #2 \\ #3 \end{array}\right]}\) \(\newcommand{\cthreevec}[3]{\left[\begin{array}{c}#1 \\ #2 \\ #3 \end{array}\right]}\) \(\newcommand{\fourvec}[4]{\left[\begin{array}{r}#1 \\ #2 \\ #3 \\ #4 \end{array}\right]}\) \(\newcommand{\cfourvec}[4]{\left[\begin{array}{c}#1 \\ #2 \\ #3 \\ #4 \end{array}\right]}\) \(\newcommand{\fivevec}[5]{\left[\begin{array}{r}#1 \\ #2 \\ #3 \\ #4 \\ #5 \\ \end{array}\right]}\) \(\newcommand{\cfivevec}[5]{\left[\begin{array}{c}#1 \\ #2 \\ #3 \\ #4 \\ #5 \\ \end{array}\right]}\) \(\newcommand{\mattwo}[4]{\left[\begin{array}{rr}#1 \amp #2 \\ #3 \amp #4 \\ \end{array}\right]}\) \(\newcommand{\laspan}[1]{\text{Span}\{#1\}}\) \(\newcommand{\bcal}{\cal B}\) \(\newcommand{\ccal}{\cal C}\) \(\newcommand{\scal}{\cal S}\) \(\newcommand{\wcal}{\cal W}\) \(\newcommand{\ecal}{\cal E}\) \(\newcommand{\coords}[2]{\left\{#1\right\}_{#2}}\) \(\newcommand{\gray}[1]{\color{gray}{#1}}\) \(\newcommand{\lgray}[1]{\color{lightgray}{#1}}\) \(\newcommand{\rank}{\operatorname{rank}}\) \(\newcommand{\row}{\text{Row}}\) \(\newcommand{\col}{\text{Col}}\) \(\renewcommand{\row}{\text{Row}}\) \(\newcommand{\nul}{\text{Nul}}\) \(\newcommand{\var}{\text{Var}}\) \(\newcommand{\corr}{\text{corr}}\) \(\newcommand{\len}[1]{\left|#1\right|}\) \(\newcommand{\bbar}{\overline{\bvec}}\) \(\newcommand{\bhat}{\widehat{\bvec}}\) \(\newcommand{\bperp}{\bvec^\perp}\) \(\newcommand{\xhat}{\widehat{\xvec}}\) \(\newcommand{\vhat}{\widehat{\vvec}}\) \(\newcommand{\uhat}{\widehat{\uvec}}\) \(\newcommand{\what}{\widehat{\wvec}}\) \(\newcommand{\Sighat}{\widehat{\Sigma}}\) \(\newcommand{\lt}{<}\) \(\newcommand{\gt}{>}\) \(\newcommand{\amp}{&}\) \(\definecolor{fillinmathshade}{gray}{0.9}\)

    The adjective transient applies to system response that is dynamic for a finite time interval (often called the settling time), but is essentially static thereafter.

    Consider the 1st order problem presented in Chapter 2,

    \[\dot{x}-a x=b U e^{-w t}, x(0)=x_{0}, \text { solve for } x(t), t>0 \nonumber \]

    with solution,

    \[x(t)=x_{0} e^{a t}+\frac{b U}{a+w}\left(e^{a t}-e^{-w t}\right), \text { for } t \geq 0 \nonumber \]

    If we let \(w\) = 0, then the input term becomes the step function, \(U\left[e^{-w t}\right]_{w=0}\) = \(U H(t)=U\) for \(t\) < 0, \(H(t)\) being the Heaviside unit-step function defined in Section 2.4. So the problem and solution become:

    \[\dot{x}-a x=b U, x(0)=x_{0}, \text { solve for } x(t), t>0 \nonumber \]

    \[x(t)=\frac{b U}{(-a)}\left(1-e^{-(-a) t}\right)+x_{0} e^{-(-a) t}, \text { for } t \geq 0\label{eqn:3.3} \]

    In Equation \(\ref{eqn:3.3}\), we write \(a=-(-a)\) because usually \(a\) < 0 for engineering systems, as in Equation 3.3.3. We want to consider two special cases of solution Equation \(\ref{eqn:3.3}\):

    1. pure initial condition response for \(U\) = 0 and
    2. pure step response for \(x_{0}\) = 0.

    Stable initial condition (IC) response

    \[x(t)=x_{0} e^{-(-a) t}, \text { for } t \geq 0\label{eqn:3.4} \]

    Define the 1st order-system time constant,

    \[\tau_{1} \equiv \frac{1}{(-a)}\label{eqn:3.5} \]

    For example, the time constant for the reaction wheel from Equation 3.3.3 is \(\tau_{1} \equiv \frac{J}{c_{\theta}}\). You should satisfy yourself, using Table 3.1.1 if necessary, that the quantity \(J / c_{\theta}\) has the dimension of time (unit of second). With this definition of time constant \(\tau_{1}\), solution Equation \(\ref{eqn:3.4}\) becomes:

    \[x(t)=x_{0} e^{-t / \tau_{1}} \equiv x_{0} \exp \left(-t / \tau_{1}\right), \text { for } t \geq 0\label{eqn:3.6} \]

    clipboard_ebf06f83e9ec98ce55a3a71974a16132b.png
    Figure \(\PageIndex{1}\): 1st order initial-condition response

    At the time constant, \(t=\tau_{1}\), the response has decayed to \(e^{-1}\) = 37% of the initial value. The other time “milestone” to which we shall often refer is \(t=4 \tau_{1}\), which we call the settling time, at which time the response has decayed to \(e^{−4}\) = 2% of the initial value. For most practical engineering purposes, this settling time is considered to be the time required for the response essentially to reach its final steady-state value, which is \(x\) = 0 in this case of IC response. Mathematically, \(x\rightarrow 0\) only as \(t \rightarrow \infty\).

    If the constant \(a\) is positive, then we write IC solution Equation \(\ref{eqn:3.4}\) as \(x(t)=x_{0} e^{a t}\). The mathematical response represented by this solution is unbounded: \(x \rightarrow \infty\) as \(t \rightarrow \infty\). In reality, no engineering variable will ever become infinite: as the variable becomes large, something in the system will fail or overload, or the system will become nonlinear, or the response will be limited by a governor, etc. Even though the actual response will not become infinite, an exponentially increasing linear mathematical response such as this is usually undesirable for practical purposes; an engineering system that exhibits this kind of response is considered to be engineering system with unstable. On the other hand, a negative constant \(a\) is stable.

    The time constant \(\tau_1\) is such an important quantity for stable 1st order systems that we shall re-cast the standard 1st order system ODE in terms of \(\tau_1\), rather than constant \(a\), using Equation \(\ref{eqn:3.5}\). Thus, rather than analyzing Equation 1.2.1, \(\dot{x}-a x=b u(t)\), hereafter we shall usually consider the following standard stable form for 1st order systems:

    \[\dot{x}+\frac{1}{\tau_{1}} x=b u(t)\label{eqn:3.7} \]

    Stable step response

    In Equation \(\ref{eqn:3.3}\), we set \(x_0\) = 0 and use time constant definition Equation \(\ref{eqn:3.5}\) to obtain

    \[x(t)=b U \tau_{1}\left(1-e^{-t / \tau_{1}}\right) \equiv b U \tau_{1}\left[1-\exp \left(-t / \tau_{1}\right)\right], \text { for } t \geq 0\label{eqn:3.8} \]

    Figure \(\PageIndex{2}\) is a graph of the exponential rise to a positive final value that is indicated in Equation \(\ref{eqn:3.8}\).

    clipboard_e967aaca1a0dcabb3edb29a8870976b36.png
    Figure \(\PageIndex{2}\): 1st order step response

    The final value of unit-step response is \(b U \tau_{1}\), and it is approached asymptotically as \(t \rightarrow \infty\). At the time constant, \(t=\tau_{1}\), the response has risen from the IC of zero to \(1-e^{-1}\) = 63%. At \(t=4 \tau_{1}\), the settling time, the response has risen to \(1-e^{-4}\) = 98% of the final value.

    Step response solutions such as Equation \(\ref{eqn:3.8}\) are usually an approximation to the actual response since, in reality, a pure, discontinuous step change in a physical input quantity is rarely achievable. Nevertheless, step input is a sufficiently close approximation to many real physical inputs that step response solutions such as Equation \(\ref{eqn:3.8}\) are close approximations to actual physical responses.

    Consider again the reaction wheel of the previous section. Let us denote a step input from the motor as \(M_{m}(t)=M \times H(t)\). Then ODE Equation 3.3.3 becomes

    \[\dot{p}-a p=b M_{m}(t)=b M H(t)=b M \text { for } t>0, \text { where } a=-\frac{c_{\theta}}{J}=-\frac{1}{\tau_{1}} \text { and } b=\frac{1}{J}\label{eqn:3.9} \]

    So the time constant is \(\tau_{1}=-1 / a=J / c_{\theta}\), and solution Equation \(\ref{eqn:3.8}\) becomes

    \[p(t)=b M \tau_{1}\left(1-e^{-t / \tau_{1}}\right)=\frac{1}{J} M \frac{J}{c_{\theta}}\left(1-e^{-t / \tau_{1}}\right)=\frac{M}{c_{\theta}}\left(1-e^{-t / \tau_{1}}\right) \mathrm{rad} / \mathrm{sec}, \text { for } t \geq 0\label{eqn:3.10} \]

    Note that in this case we adapt the “standard” mathematical solution Equation \(\ref{eqn:3.8}\) to a particular physical problem. This approach is common in system dynamics. In other words, it is not always necessary to solve an ODE for every new physical problem; if a standard ODE solution has already been derived, you may just adapt that standard solution to the physical problem at hand, rather than re-deriving the ODE solution.


    This page titled 3.4: Simples Transient Responses of First Order Systems, First Order Time Constants and Settling Times is shared under a CC BY-NC 4.0 license and was authored, remixed, and/or curated by William L. Hallauer Jr. (Virginia Tech Libraries' Open Education Initiative) via source content that was edited to the style and standards of the LibreTexts platform.